FlushMinder TF Automatic Dual-Flush Kit fits Top Flush Push Button Toilets
(for standard flapper valve toilets, see the FlushMinder G4 here)
- NEW Top Button Flush Actuator fits Most Modern Style Top Flush Push Button Toilets
- No Hands Flush Prevents Toilet Handle Cold Flu Virus Transmission
- Computerized Automatic Dual-Flush System Senses for Half or Full Flush
- Quick and Easy DIY Install on Most Modern Top Flush Toilets
- Fully Adjustable and Programmable for Different Tank Sizes and Flush Quantity
- Includes 6 AA Standard Alkaline Batteries for up to 1 Year – 5,000 Flushes
- Ideal for High-Use Toilets, Children, Elderly, Disabled and Cats . . . Yes, Cats ! ! !
- Cleanliness: No touch forces regular flushes and helps mitigate the spread of germs
- Versatility: Fits newer top flush toilets, does not interfere with manual button flush
- Water Saving: Automatic dual flush computer timer senses for half or full flush as required
- Affordable: Retrofit kit is a much cheaper alternative than purchasing a brand new toilet
For additional information and troubleshooting tips, see the FlushMinder FAQ . . .
This exclusive and innovative dual-flush toilet conversion system fits most newer toilets with a top push button and is FULLY AUTOMATIC. Upon toilet use, a computerized human-presence sensor measures the “time-at-the-toilet” and then automatically activates a motorized flusher inside the button actuator tank for a half-flush (#1) or full-flush (#2) as required.
The toilet can still be flushed manually and one automatic full flush cycle also occurs weekly to keep the bowl refilled when there is no usage . . . great for empty apartments or other vacant bathrooms to keep the sewer gases from escaping an empty bowl. For additional manual Timed Flushes, an inexpensive clock mechanism can be attached to the top of the detection head with double-sided tape. Then an hour hand or multiple hands can be added to pass over the detection eye and trigger 2 or more manual flushes per day (see pic). This simple modification is great for situations where the presence detection doesn’t trigger reliably such as with a cat moving around on the seat or an elderly or disabled person not getting or staying in front of it long enough.
Installation and setup is quick and easy with minimal tools, NO TANK REMOVAL or advanced plumbing skills required.
Runs on standard AA alkaline batteries (included) for up to 1 year or 5,000 worry-free flushes. Saves water and improves sanitation – perfect for children, the elderly or any high-use bathroom area where flushing delinquency is a problem.
Also makes a great cat potty training accessory for autoflush after use . . . see online for cat potty training aids and information, plus note the reviews and YouTube videos from customer experiences. Results can vary widely, so specific cat potty training setup and instructions are NOT INCLUDED and NOT GUARANTEED.
NOTE: Each automatic presence sensor is precisely calibrated and tested in a factory test lab before shipment to detect from 0 – 31.5 +/- 4.0 inches (80 +/- 10 cm). The Push Button actuator fits standard 2″ (53mm) lid mount holes with either single or dual flush valves. Be sure that the toilet lid hole will fit the actuator and that the bathroom configuration will allow a suitable installation within the detection range and with no obstructions.
Additional setup information and troubleshooting tips are available on our Troubleshooting and Support FAQ page and ALL FlushMinder Replacement Parts are available separately upon request.
Susan Placer –
I’ve been looking for something like this to fit my top flush toilet for quite a while and glad I finally found it. It not only does the dual flush, but the button still works for full flush as required. Great!
I wasn’t sure I could install this kit myself, but the instructions and pictures were pretty clear all my questions were answered promptly by the Water Saver folks, so got it done. I’m wanting to set this up for my cat, so still figuring out how to orient the sensor but getting there. So far he manages to activate it about 2/3 of the time, so that’s pretty good. I may set it up for the times flushes also, but may not need that.
This keeps the toilet in our small office flushed and neat so there are no icky surprises for customers who use the bathroom. Works fine, not difficult for even a non-handyman to install.
Raymond Savits –
This product works as advertised, but more importantly, the support is EXCELLENT. They don’t do phones, but answer email questions quickly with PROFESSIONAL plumber support at no charge. I would have had to pay a plumber $250 or more to install this kit, but did it myself with the online help. Really Great . . . Thanks
Kathy Gawyer –
This kit works perfectly with my Glacier Bay top flush toilet I got from Home Depot. I was a little worried about how it would all look put together but the FlushMinder unit and push button motor both have a nice satin pearl color that blends nicely with the white ceramic, so looks fine. I only want mine to do a full flush each time regardless, so I simply set the half flush all the way up to full flush with the magnetic wand and now it does only full flushes.
Jason Cravitts –
We have 2 regular handle toilets downstairs and then a top flush in our small bathroom upstairs. I have the other FlushMinder G4 type installed on those handle toilets and they work great, but that style won’t work on the top flush, so I have been waiting for this version to come out. It installs a little differently of course but the setup and essentially the same. The trick is getting the push rod length and position set correctly. I did have to fiddle with it some to get it right, but wasn’t a big deal. Now I have FlushMinders on all 3 toilets, so no more “missed” flushes. JC